|
Clutch & Drive Belts
A centrifugal clutch is a clutch that operates automatically via rotational motion rather than lateral. In an automobile clutch with a manual transmission, the clutch is deactivated with a foot pedal which in turns pushes on a fulcrum, which retracts the pressure plate, causing the engine and transmission to separate from power, and the driver able to change gears more...
 Home
ATV Parts
Apparel & Merchandise
Automotive Tools
Aviation Parts
Boat Parts
Car & Truck Parts
Car Audio, Video
Manuals & Literature
Motorcycle Parts
Other Vehicle Parts
Personal Watercraft Parts
Racing Parts
Services & Installation
Snowmobile Parts
 Accessories
Air Intake & Fuel Systems
Body Parts
Brakes
Clutch & Drive Belts
Decals & Stickers
Electrical Components
Engines & Components
Exhaust
Gauges & Cables
Handle Bars / Mirrors
Lighting
Other Parts
Seats
Shocks & Suspension
Skis & Runners
Snowmobile Covers
Starters
Tracks & Studs
Windshields
Vintage Car & Truck Parts
Wholesale Lots
A centrifugal clutch works through centrifugal force. The input of the clutch is connected to the engine crankshaft while the output may drive a shaft, chain, or belt. As engine RPM increases, weighted arms in the clutch swing outward and force the clutch to engage. The most common types have friction pads or shoes radially mounted that engage the inside of the rim of a housing. On the center shaft there are an assorted amount of extension springs, which connect to a clutch shoe. When the center shaft spins fast enough, the springs extend causing the clutch shoes to engage the friction face. It can be compared to a drum brake in reverse. This type can be found on most home built karts, lawn and garden equipment, fuel powered model cars and low power chainsaws. Another type used in racing karts has friction and clutch disks stacked together like a motorcycle clutch. The weighted arms force these disks together and engage the clutch.
When the engine reaches a certain RPM, the clutch activates, working almost like a continuously variable transmission. As the load increases the rpm drops, disengaging the clutch, letting the rpm rise again and reengaging the clutch. If tuned properly, the clutch will tend to keep the engine at or near the torque peak of the engine. This results in a fair bit of waste heat, but over a broad range of speeds it is much more useful than a direct drive in many applications.
Centrifugal clutches are often used in mopeds, underbones, lawnmowers, battlebots, go-karts, chainsaws and mini bikes to:
keep the internal combustion engine from stalling when the blade or weapon is stopped abruptly;
provide low load during starting;
allow engine to idle;
Thomas Fogarty, who also invented the balloon catheter, is most often credited with first inventing the centrifugal clutch in the 1940's, although automobiles were being manufactured with centrifugal clutches as early as 1936 (Dr Fogarty was born in 1934).
Read more at Wikipedia.org
|
|
